2022 Rears MFG 750 Series Low Profile 62 Narrow

Information

2022 Rears MFG 750 Series Low Profile 62 Narrow

The OMF is our low profile housing orchard shredder designed to work under low tree skirting. Each cutter drum features variably spaced clevis pad and blade or hammer assemblies to provide a smooth running and clean cutting operation. Each frame includes a multi-position rear deflector door which helps hold material in the cutting path longer. The models in this series have our proven belt tensioning system. Rotor and roller bearings are protected in the dirtiest environments by our labyrinth greasing system.

Features may include:
  • Fixed or hydraulic offset 3-point mast.
  • 100, 200 and 700 series housing and drive configurations.
  • Vineyard, upright or low profile belt housing profiles.
  • FL948 hammer, FL940 side slicer or FL930 side slicer blades.
  • Rear brush rakes.
  • Front or rear tractor mounting.

Photos

Highlights

  • Visalia, California
  • 2022
  • Rears MFG
  • 750 Series Low Profile 62 Narrow
  • Available
  • Pantograph offset by swath: (-8)-10”
  • Cut: 0” - 412” set with gauge roller | Flail housing: 19 1/4” | Belt housing: 25 5/8”

Specifications

  • 2022
  • Rears MFG
  • 750 Series Low Profile
  • 62 Narrow
  • General
  • 540 rpm
  • Shielded, low friction rolled spline shaft ASAE Cat.6 U-Joints
  • Ratio: 1:3.1 | Input: 1.375” 6 spline | Output: 1.375” 6 spline
  • Belt: 4/5VX notched Powerband
  • Rotor: 540 rpm
  • 3-point mount: Cat I & II with floating top link mount
  • Available swath: 4’ - 9’ | Housing: 38” plate inner housing, 316” plate skin
  • + 15”
  • Cut: 0” - 412” set with gauge roller | Flail housing: 19 1/4” | Belt housing: 25 5/8”
  • Pantograph offset by swath: (-8)-10”
  • 6 5/8” diameter | 1 3/4” diameter shaft
  • bearing: 2.44” double spherical roller bearing | Narrow units: 2.44” | construction: 8 5/8” diameter mandrel, .50” wall / 2.44” dia. shaft | Rotor pad, bolt: 1 1/2” rotor pad with 3/4” bore, grade 9 mount bolt
  • 6’ 2194 lbs +/- 155 lbs/ft + blades
  • Skid shoes: retreadable | Debris guard: Chain guard, belt guards available | Rear recycling door: 3 position door | Rakes: Floating rakes available
  • Roller: Triple seal bearing in piloted steel housing with antiwrap. Pilot housing joints with machined slot in height adjustment plate to bear flail weight. | Rotor: Renewable grease labyrinth protection and antiwrap | Narrow units: double spherical roller bearing Internal mount housing
  • Rotor: 1045 carbon steel
  • Fixed tooth