2022 Rears MFG Power Shredder Pul

Information

2022 Rears MFG Power Shredder Pul

The Power Shredder is our largest and heaviest PTO powered brush shredder. The drive train, starting with our 71 series CV hitch, is designed to perform in severe brush loads for coarse material reduction. All units are dual 5-groove belt drives. The swinging carbide hard faced hammers and steel pivot mounts are welded to extra heavy 7/8" wall rotor pipe. The main housing is constructed of 3/8" rolled plate between 1/2" thick end plates.

Features may include:
  • 7', 8' and 10.5' cut widths.
  • Bolt in replaceable liners.
  • Standard 71 series CV hitch or rigid drawbar hitch.

Photos

Highlights

  • Visalia, California
  • 2022
  • Rears MFG
  • Power Shredder Pul
  • Available
  • Cutting: 3x8 Cyl installed: 3/4" - 8"| Rake: 37" | Hausing drive end: 28 1/2" / idler end: 27 1/2"

Specifications

  • 2022
  • Rears MFG
  • Power Shredder
  • Pul
  • Flail Mowers
  • Shielded, low friction rolled spline shaft | Drive: ASAE Category 6 U-joints
  • 8 - 10 hp | 540 rpm
  • 85 HP rated w/ 90° bevelled gear set
  • Rotor: 2000 rpm / 1750 rpm | Knife Tip: 2000 rpm: 12,500 fpm / 1750 rpm: 10,500 fpm
  • 3 Point Mount: Category 1/2 or Quick
  • Husing: SIngle 3/16" wall hausing
  • 8 5/8" Mandrel
  • Cutting: 3x8 Cyl installed: 3/4" - 8"| Rake: 37" | Hausing drive end: 28 1/2" / idler end: 27 1/2"
  • 16" Over Swath
  • 6' machine: 3307 lbs. wider machines add 218 lbs./ft + blades
  • Rotor: 2 3/4" dia. 1045 carbom steel rotor shaft / 5/8" x 1 1/2" rotor bar-seam walded
  • Drive: 5 grove 5VX notched powerband
  • rotor: 2.44" double spherical roller with auxilliary grease labyrinth seal